MusikMesse Frankfurt 2008

KBV-600 doublebass & bass guitar amplifier

Input 1 :"Slap":

XLR / jack hybrid connector
Gain switching pushbutton +20 Db
Gain control +0 to +36 db
Variable low-cut between: 1,6 kHz to 6 kHz with
Bypass and Mute pushbuttons with indicator-LEDs
LED peakmeter -21 db - +6 db

Input 2 "Bass":

XLR / jack hybrid connector
Gain switching pushbutton
Gain control +0 to +36 db
Variable low-cut between: 400 Hz und 1,6 kHz with
Bypass and Mute pushbuttons with indicator-LEDs
LED peakmeter -21 db to +6 db

In relation to both Inputs:

Mix control fader between "Slap" und "Bass"
Sum Level Control + - 20 db

4-band fully parametric EQ:

level- Q-factor- and frequenz-control / + - 18 db

Output power amp:

Pushbutton EQ on / off with indicator-LED
LED peakmeter -21 db to +6 db
switchable pre / post EQ
Mute pushbutton with indicator-LED
Amp-out master volumen control
Power-amp supplying 600 Watt RMS into 4 Ohm
(loadable down to 1 ohm)

Line Output:

Pushbutton EQ on / off with indicator-LED
LED peakmeter -21 db to +6 db
switchable pre /post EQ
Mute pushbutton with indicator-LED
Line-out master volume control
Line-out jack at front panel
Power on switch with power-amp stand-by indicator-
LED ( switch-on delay 5 sec. )

Terminals at back:

Mains fused IEC inlet
Channel 1 output "Slap" XLR balanced
Channel 2 output "Bass" XLR balanced
Mute foot switch out jack
Insert (Mix) per 6.3 mm Jack
Insert (Bass) per 6.3 mm Jack
Insert (Slap) per 6.3 mm Jack
Dimenssions:
19-inch 2 units
Weight ca 4 KG
Modifications reserved.
Versions available:
"KBV-PRE" - with same features, but without
internal power-amp
"KBV-600-110V" with 110 V power supply