Engine Mock-up Pics 09-01-2007 |
Here's some pics of my engine mock-up. This isn't the engine that's going in, just a mock-up. It's so I can fabricate the air box, intercooler brackets, etc. I am now going to disassemble the engine a...
Posted by Gregory on Sun, 02 Sep 2007 01:46:00 PST |
DRIFT! AE86 Update 05-13-2007 |
I finally got the base coat sprayed. Not too good, but I will wetsand and spray another coat after I get the engine sorted out. It's good enough for now, and I will start bolting stuff ...
Posted by Gregory on Mon, 14 May 2007 06:33:00 PST |
DRIFT! AE86 Update - 05/08/2007 |
99% of the bodywork in the engine compartment is complete. It's now time to do a final wet sanding before spraying the black base coat.
Yup, lots of drips, but it's only primer... I purpose...
Posted by Gregory on Wed, 09 May 2007 01:41:00 PST |
DRIFT! AE86 Update 12/17/2006 |
Finishing up the bodywork in the engine compartment. Right now it's about 90% complete, with a fresh coat of primer. I just have to touch up several areas, then I can spray the base coat.
&nbs...
Posted by Gregory on Mon, 18 Dec 2006 12:29:00 PST |
11/13/2006 DRIFT! AE86 Update |
Here's some pics of the engine compartment with most of the metal fabrication complete. It's coated with a metalic epoxy rust inhibitor coating. When the coating is fully cured, I ca...
Posted by Gregory on Tue, 14 Nov 2006 09:46:00 PST |
AE86 Pics Halloween update |
Some pics of the fabrication in progress. Looks rough, but after some body filler and paint, it will be smooth and seamless.
...
Posted by Gregory on Tue, 31 Oct 2006 10:06:00 PST |
Project: DRIFT! AE86 update |
Here's an update of my project in progress: DRIFT! AE86.
I finished the fabrication of the back half of the car; The trunk space has been modified to accept a fuel cell...
Posted by Gregory on Fri, 21 Jul 2006 01:05:00 PST |
