I edited my profile at Freeweblayouts.net , check out these Myspace Layouts!
I'm the wave of the future for energy. While the international community spends billions to fund ITER, I only require a few million to develope.If I am developed I will help remedy the world's thirst for energy and help stem the gas crisis.Please support me!http://www.focusfusion.orgFocus Fusion Reactor
by Admin on Jul 13, 2006 at 06:20 PM : : Printer Friendly
= Plasma Focus device + Hydrogen-Boron Fuel
Focus fusion reactors - reactors that use hydrogen-boron fuel and the dense plasma focus device - are expected to provide virtually unlimited supplies of cheap energy in an environmentally sound way.
The Dense Plasma Focus - History and Design
The Dense Plasma Focus (DPF) is a device that has been used in research for the last 40 years. It was invented in 1964 and is used in many types of research. More on the history of the DPF and Focus Fusion »
The plasma focus device consists of two cylindrical copper or berillyum electrodes nested inside each other. The outer electrode is generally no more than 6-7 inches in diameter and a foot long. The electrodes are enclosed in a vacuum chamber with a low pressure gas (the fuel for the reaction) filling the space between them.
The Gas used in the DPF: Hydrogen-Boron Fuel
Note that the gas we plan to use in the DPF is a mixture of Hydrogen and Boron. For more about this fuel for a fusion reaction, see our discussion of Deuterium-Tritium vs. Hydrogen-Boron. For an explanation of the research steps needed to use this type of fuel with the DPF, see our research plan, specifically the section on experimental tests and data collection.
How the Plasma Focus can be used to produce net energy from a fusion reaction
A pulse of electricity from a capacitor bank (an energy storage device) is discharged across the electrodes. For a few millionths of a second, an intense current flows from the outer to the inner electrode through the gas. This current starts to heat the gas and creates an intense magnetic field. Guided by its own magnetic field, the current forms itself into a thin sheath of tiny filaments; little whirlwinds of hot, electrically-conducting gas called plasma. A picture of these plasma filaments is shown on the website focusfusion along with a schematic drawing. Another picture from a different angle is shown as well.
This sheath travels to the end of the inner electrode where the magnetic fields produced by the currents pinch and twist the plasma into a tiny, dense ball only a few thousandths of an inch across called a plasmoid. All of this happens without being guided by external magnets.
The magnetic fields very quickly collapse, and these changing magnetic fields induce an electric field which causes a beam of electrons to flow in one direction and a beam of ions (atoms that have lost electrons) in the other. The electron beam heats the plasmoid thus igniting fusion reactions which add more energy to the plasmoid. So in the end, the ion and electron beams contain more energy than was input by the original electric current.
How the energy can be turned directly into electricity
These beams of charged particles are directed into decelerators which act like particle accelerators in reverse. Instead of using electricity to accelerate charged particles they decelerate charged particles and generate electricity. Some of this electricity is recycled to power the next fusion pulse while the excess, the net energy, is the electricity produced by the fusion power plant.
Conclusion
As explained in our â€Conventional Fusion vs. Focus Fusion“ page, Focus fusion is the only known method that can achieve hydrogen-boron fusion. It also has other advantages over tokamak based deuterium-tritium fusion reactors. Focus fusion reactors will be much less expensive for the same amount of power. Tokamak reactors generate electricity by boiling water for a steam powered generator (high energy neutrons provide the heat.) This is the same method that nuclear fission and coal power plants use. The only difference is the heat source.
In a coal power plant the steam generator is the most expensive part of the plant so replacing the heat source will not result in a lot of savings. Also, this method of generating electricity is limited by the fundamental efficiency limits of heat engines. Focus fusion reactors do not require a heat engine. They generate electricity directly. After all, electricity is just moving charged particles. The particle decelerators in a focus fusion reactor merely transfer the electricity of charged particle beams into a wire. This process does not face the efficiency limits of heat engines.
A focus fusion reactor should be able to economically generate power in quantities as small as 20MW from a power plant the size of a two car garage. This means they will be useful for powering individual villages in the third world where regional electricity grids are not as well developed (for more about focus fusion and poverty, click here). And in developed nations focus fusion power can be generated near where it will be used to reduce transmission losses and can be owned by the communities it serves to reduce dependence on speculative energy markets.
Help us make this happen! Go to http://www.focusfusion.org to support our research efforts today!
