About Me
Radiant Powder, LLC.
Perfect Powder finish
Every time!Our MissionAt Radiant Powder, LLC. We take pride in offering only the highest quality finishes to our customers. All our preparation and coating is done by hand - not machine- so that we are able to pay close attention to detail.What is Powder Coating?Powder coating has been around for about 50 years. It was developed when they found a formulation for a finely ground “plastic†powder. That was the beginning of the powder coating industry.The process of powder coating is done by first cleaning the part to a dry, bare metal surface, a special electrostatic spray gun with 30,000 to 90,000 volts, is used to apply a thin layer of “plastic†powder onto the surface of the part to be coated. The powder is held onto the part by static electricity. Kind of like dust on a TV. Once coated, the part is oven baked at approximately 400 degrees Fahrenheit. The curing oven melts the dry powder to a “gel state†and then further curing causes this gel to harden into a very tough “plastic†coating. This flowing of the coating in the final curing oven creates a continuous coating which is very hard and has no porosity.Why Powder Coating?Powder Coating does not use solvents, there are no toxic chemicals released into the air, thus EPA regulation do not add expense to this process. Also, for about the same cost as professionally applied paint, powder coating offers a superior finish combined with an excellent durability that will extend the life of the part. Powder coating is very chip and crack resistant, flexible, and can be applied to all metals.20801 Nth 21st Ave Suite B Phoenix, AZ. 85027
Phone 623-204-1859
