STEP BY STEP |
Oil stain and cotton swab.
tinted the oil stain uniformly, thinly, carefully...It's the nice moment when a grain of wood appears. So exited !
Joy doesn't continue for a long time. Wi...
Posted by kaz on Wed, 14 Feb 2007 06:28:00 PST |
SHARPEN IT AGAIN. |
Wrap the top and end metal in masking tape.
Sharpen it with 80-grit again till a handle comes to hurt. A lot of koa wood dust is born. Bad influence on your respiratory sy...
Posted by kaz on Tue, 13 Feb 2007 05:09:00 PST |
CROSS YOUR FINGER ! |
Because it failed last time, it is a fresh start !
I pack ballast in a core.
The ballast which protruded pushes it with a toothpick.
This time, I beat carefully not to be missing .
OH ...
Posted by kaz on Mon, 12 Feb 2007 05:04:00 PST |
I'M NOT SUCCESSFUL... |
OMG!!! missing...the rim has been broken.
beaten my fingir ,too...
In such a case....
I listen to music and switch a feeling !
However, when will this be completed in ???...
Posted by kaz on Sun, 11 Feb 2007 11:39:00 PST |
WEIGHT OF AN ARROW |
There is 3 kinds of weight. (16g/18g/20g) I make an arrow of 20g heaviest. adjust it in ballast so that all parts which included a flight and soft tip become 20g. How is assembling order?
...
Posted by kaz on Tue, 06 Feb 2007 07:12:00 PST |
SANDING IS HARD WORK |
I sharpened it with a knife in form such as conga of a musical instrument.
It's sanding with 80-grit abrasive paper earnestly.My nail and skin are sharpened, too.While I work, I do not bring myself....
Posted by kaz on Mon, 05 Feb 2007 06:25:00 PST |
SHAPE AND FIX FORM |
Fix form with a thin blade knife.Curly koa wood is the feeling that a hard part and a soft part are piled up in turn. Be careful not to cut your finger.
It's my best knife.Easy to mak...
Posted by kaz on Sun, 28 Jan 2007 05:40:00 PST |
CORE IS IMPORTANT ! |
Fine warmth worth day is good if you work.
Did you experience cold of Japanese winter ?
Spread of glue to metal surface.
Insert a core in KOA!
OMG!!!
Such a result when you continue worki...
Posted by kaz on Sat, 27 Jan 2007 04:31:00 PST |
WORK SPACE SHOULD KEEP CLEAN |
The next work widens a hole with 6.5mm bit.
hey,why do you work on a carpet ?
Therefore actually I worked on a terrace.
Look ! beautiful curly...
I'm not GHOST BUSTERS.
Keep clean your wo...
Posted by kaz on Wed, 24 Jan 2007 06:58:00 PST |
DIG A HOLE ! |
RYOBI is my favorite. 100V 1200R.P.M !
prepare 6.5mm and 2.0mm drill bit.
At first , dig a guidance hole with 2.0mm bit.
I'm not a terrorist ! dig a hole.
To be continued......
Posted by kaz on Tue, 23 Jan 2007 07:18:00 PST |
