How did the Twin Towers fall? 1. Impact from the Terrorist Planes When Boeing jets piloted by terrorists struck the Twin Towers, some 10,000 gallons (38 kiloliters) of jet fuel fed an enormous fireball. But, the impact of the planes and the burst of flames did not make the Towers collapse right away. Like most buildings, the Twin Towers had redundant design. The term redundant design means that when one system fails, another carries the load. Each of the Twin Towers had 244 columns around a central core that housed the elevators, stairwells, mechanical systems, and utilities. When some columns were damaged, others could still support the building. 2. Heat from the Fires The sprinkler system was damaged by the impact of the planes. But even if the sprinklers had been working, they could not have maintained enough pressure to stop the fire. Fed by the remaining jet fuel, the heat became intense. Most fires don't get hotter than 900 to 1,100 degrees F. The World Trade Center fire may have reached 1,300 or 1,400 degrees F. Structural steel does not easily melt, but it will lose about half its strength at 1,200 degrees F. The steel structure of the Twin Towers was weakened by the extreme heat. The steel also became distorted because the heat was not a uniform temperature. 3. Collapsing Floors Most fires start in one area and then spread. The fire from the terrorist planes covered the area of an entire floor almost instantly. As the weakened floors began to collapse, they crashed into the floors below. With the weight of the plunging floors accelerating, the exterior walls buckled.
Made with the MyTheme myspace editor
Get this video and more at MySpace.com src="http://lads.myspace.com/videos/vplayer.swf" flashvars="m=797636467&type=video" type="application/x-shockwave-flash" width="430" height="346"
Get this video and more at MySpace.com
